EVS Metal Fabrication: Texas

PFLUGERVILLE (AUSTIN) FACILITY

EVS Texas Facility

EVS Metal’s Texas sheet metal fabrication facility is conveniently located in Pflugerville, just outside of Austin, and comprises 43,000 square feet of modern, climate-controlled manufacturing space. A significant portion of our shop floor is dedicated to the most modern CNC machining equipment on the market.  Our Austin location is one of our two International Traffic in Arms Regulations (ITAR)-registered metal fabrication facilities. ITAR registration is required by the U.S. State Department’s Directorate of Defense Trade Controls (DDTC) for all of its contracted manufacturers, exporters and brokers. As a registered manufacturer, EVS has been given federal clearance to submit bids and subsequently supply finished defense articles for the United States Government and its authorized subcontractors. 

Address: 400 Heatherwilde Blvd., Pflugerville, TX 78660 
Phone: (512) 989 3000 – Fax: (512) 989 3031 

EVS TX specializes in:


 
 
Capabilities:
(click text to expand)
  • Solidworks 3D CAD Solid Modeling Software
  • Amada AP100 CAD/CAM Software
  • Mastercam X10 Machining Software
  • Amada Dr Abe Bend
  • Amada Sheet Works
  • 40″ Mitutoyo Electronic Digi-Master
  • Mitutoyo 18″ Dial Height Gauge
  • FabriVISION© SL-5 Vision Inspection Machine
  • The ROMER Absolute Arm – 6 axis
  • Amada EMK 3612MII Turret Punch Press including (4) built in tapping stations with ASR 3015N automated FMS Material Retrieval and Storage
  • Amada Vipros 358 King II Hydraulic Turret Press with Automated Loading/Unloading
  • (2) Amada Togu Auto Tool Sharpener
  • Haas 2020 EC-400 Horizontal Machining Center
    • 40 Taper, 4 Axis, 8.1K RPM, 30HP
    • X-22″, Y-25″, Z-22″
    • 100+1 tool changer
    • Full 4th-axis indexing, 6-station 400mm pallet pool
  • (2) Haas VF2 Vertical Machining Center
    • 40 Taper; 3 Axis; 8.1k RPM; 20 Tool Capacity, 30.0 HP
    • X- 30.0″; Y- 16.0″; Z- 20.0″
  • Haas VF4 Vertical Machining Center
    • 40 Taper; 3 Axis; 8.1k RPM; 24+1 Tool Capacity, 30.0 HP
    • X- 50.0″; Y- 20.0″; Z- 25.0″
  • (1) Haas VF4SS Vertical Machining Center
    • 40 Taper; 3 Axis; 12k RPM; 24+1 Tool Capacity, 30.0 HP
    • X- 50.0″; Y- 20.0″; Z- 25.0″
  • HAAS ST-25Y CNC Turning Center
    • 10″ Hydraulic Chuck, A2-6; 3400-rpm Spindle 30.0hp
    • 4000-rpm Live Tooling with C axis, 12-Station BMT65 Turret
    • X- 8.4″; Y- +/-2.0″; Z- 22.5″, Bar capacity = 3.0″ Ø, Two-Stage Auto-Parts Catcher
    • Programmable Tailstock
  • Bridgeport Vertical Knee Mill (manual)
  • Sharpe Vertical Knee Mill (manual)
  • Hyd-Mech 520A Series II Bandsaw with Auto Feed
    • Rectangular 13.0″ high x 18.0″ wide
    • Round 12.0″ Ø @ 45°
  • Sharp Lmv-50 With Power Feed Table
  • Xlo Vertical Knee Mill
  • Timesaver Wet Process 37″ Grain + Deburr Center
  • (3) Amada FAB III 8025 8′ 80 Ton CNC Press Brake
  • Amada FAB III 1025 8′ 100 Ton CNC Press Brake
  • Amada Astro 100 Robotic FAB III 8025 8′ CNC Press Brake
  • Amada FDB III 1025 100 Ton CNC Press Brake
  • Amada FDB III 1030 100 Ton CNC Press Brake
  • (2) Amada RG35 35 Ton Press Brake
  • Amada RG50 Press Brake, 50 Ton
  • (2) Haeger 618
  • (2) Haeger 824
  • Haeger 824 Window Touch with Auto
  • Amada TSIIIs NT-HV 80 kva Inverter Table Top Spot Welder for Steel and Aluminum
  • (2) Amada ID40ST Spotwelder
  • Miller Syncrowave 351 amp Tig Welder
  • (3) Miller Syncrowave 250DX Tig Welder
  • (4) Miller Dynasty 350 amp Tig Welder
  • Millermatic 350P Mig Welder
  • (3) Millermatic 252 amp Mig Welder
  • Three-stage gas-heated spray washer
  • Final fresh RO Halo Rinse
  • Reverse osmosis system to fill the phosphate and rinse tanks
  • Gas-heated water dryer/powder bake oven
  • 470′ monorail conveyor system
  • Nordson Vantage RCM 8000 automatic powder spray booth with Vers-Spray II six-gun reciprocating automation and i-control
  • AZO sieve reclaim
  • 3 Nordson manual spray guns
  • 2012 Chevy Cargo Van
  • 2005 Chevy Cargo Van
  • 2015 International 24’ Box Truck