Riverdale Facility

New Jersey Sheet Metal Fabrication and Manufacturing

EVS Metal’s northern New Jersey sheet metal fabrication facility is conveniently located in Riverdale at the intersections of Routes 287 and 23, approximately 30 miles northwest of New York City. It comprises 71,000 square feet of modern, climate-controlled manufacturing space.

Address: 1 Kenner Court, Riverdale, NJ 07457
Phone (973) 839 4432 – Fax (973) 839 4440

EVS NJ specializes in:

  • Low-to-high quantity production
  • Engineering assistance, including design
  • Complex value-added electrical and mechanical assemblies
  • Complex welded enclosures and frames
  • Box builds, including drop shipments to end customers
  • Precision machining: 48″x20″x20″ 1/4 ton capacity
  • In-house automated powder coating
  • In-house screening
  • Fully-automated punching
  • Fully-automated robotic bending
  • Robotic welding
  • Logistics management, including a fleet of EVS-owned delivery vehicles

 
 
Capabilities:
(click text to expand)
  • Solidworks 3D CAD Solid Modeling Software
  • Pro-Engineer Wildfire 3 Solid Modeling Software
  • Amada AP100 Cad/Cam Software
  • Mastercam X10 Machining Software
  • Amada Dr Abe Bend
  • Amada Sheet Works
  • Amada/Virtek Laser System Inspection
  • Aberlink Axiom too CMM with 20"x20"x19" Capacity
  • Cordax 1000 CMM
  • Mitutoyo 26″ Digital Height Gauge
  • Mitutoyo 18″ Dial Height Gauge
  • Dillon Dynamometer 20 Ton Capacity Pull Tester
  • Rockwell Hardness Tester
  • X-Rite SP64 Color Spectrophotometer
  • Gardco Novogloss 60 Gloss Meter
  • QuaNix Thickness Meter
  • Haas VF-2 CNC Vertical Super Speed Machining Center with Probing System; Multiple Auger; 24-1 Side MT Tooling
  • Hass VF2 Vertical Machining Center w/ 4th Axis
  • Jet JTM-1054R Variable Speed Vertical Mill with Auto-Feeds
  • Bridgeport Vertical Knee Mill
  • (4) Clausing 14” Variable Speed Drill Press
  • Boyar Schultz Surface Grinder
  • (2) Timesaver Wet Process Two-stage 37″ Graining and Deburring Center
  • Royson 48″ Vibratory Finishing Center with Integrated Drying System
  • (2) Burr King 920 2″ Heavy Duty Belt Sander
  • (2) Burr King 760 2″ Heavy Duty Belt Sander
  • Torrit 48″ × 36″ Down-flow Table
  • Boice Crane 48″ x 60″ Horizontal Stroke Sander
  • Amada FAB III 1253 Astro 120 Robotic 10′ CNC Press Brake
  • (3) Amada FAB III 8025 8′ 80 Ton CNC Press Brake
  • Amada EG 6013 AR Robotic Bending Cell with automated tool setup
  • (2) Amada FAB III 1253 10′ 120 Ton CNC Press Brake
  • Amada HG 8025NT 88 ton, 8′ bed length, 5-axis back gauge
  • (2) Amada HDS 1303 10′ 143 Ton CNC Press Brake
  • Amada HG1003ATC 10′ 110 Ton Press Brake with Automatic Tool Changer
  • Plexto 4′ Shear
  • Baileigh 20A Automatic Horizontal Bandsaw with Power Feed
  • (5) Haeger 824 Window Touch with Auto Feed and Four-station Turret Anvil
  • (2) Haeger 824 with Auto Feed
  • (3) Haeger 618 with Auto Feed
  • (5) Haeger 618
  • (1) Pemserter Series 4
  • My Spot NK-21HE810 Table Top spotwelder
  • Amada TS86K 100 KVA Table Top Welder w/ Air Balanced Electrode Gun
  • Amada TS86 80 KVA Table Top Spot Welder
  • (3) Amada ID40ST Spot Welder
  • Miller Syncrowave 350 amp Tig Welder
  • (3) Miller Dynasty 350 amp Tig Welder
  • (4) Miller Dynasty 280 amp Tig Welder
  • Millermatic 350P Mig Welder
  • (3) Miller Mig Welder

Fully automated powder coat line…

  • Three-stage gas-heated spray washer
  • Final fresh RO Halo Rinse
  • Reverse osmosis system to fill the phosphate and rinse tanks
  • Gas-heated water dryer/powder bake oven
  • 460′ monorail conveyor system
  • Direct Color Systems Direct Jet UV Color 7200z Printer 23.8″x48″ Printable Area
  • (3) Nordson manual spray guns
  • (4) Silk screening stations
  • (4) Avdel Automated Riveting System
  • 2016 Peterbilt 567 Tractor
  • 2003 Freightliner MP Tractor and 56′ Trailer
  • 2008 GMAC Kodiak 24′ Truck
  • 2019 Ford Transit 350 with extended wheelbase
  • 2006 Chevrolet 2500 Cargo Van

Printable Facility List

PFLUGERVILLE (AUSTIN) FACILITY

Texas Sheet Metal Fabrication & Manufacturing

EVS Metal’s Texas sheet metal fabrication facility is conveniently located in Pflugerville, just outside of Austin, and comprises 43,000 square feet of modern, climate-controlled manufacturing space.

Our Austin location is one of our two International Traffic in Arms Regulations (ITAR)-registered metal fabrication facilities. ITAR registration is required by the U.S. State Department’s Directorate of Defense Trade Controls (DDTC) for all of its contracted manufacturers, exporters and brokers. As a registered manufacturer, EVS has been given federal clearance to submit bids and subsequently supply finished defense articles for the United States Government and its authorized subcontractors.

Address: 400 Heatherwilde Blvd., Pflugerville, TX 78660
Phone: (512) 989 3000 – Fax: (512) 989 3031

EVS TX specializes in:


 
 
Capabilities:
(click text to expand)
  • Solidworks 3D CAD Solid Modeling Software
  • Amada AP100 CAD/CAM Software
  • Mastercam X10 Machining Software
  • Amada Dr Abe Bend
  • Amada Sheet Works
  • 40″ Mitutoyo Electronic Digi-Master
  • Mitutoyo 18″ Dial Height Gauge
  • FabriVISION© SL-5 Vision Inspection Machine
  • The ROMER Absolute Arm – 6 axis
  • Amada EMK 3612MII Turret Punch Press including (4) built in tapping stations with ASR 3015N automated FMS Material Retrieval and Storage
  • Amada Vipros 358 King II Hydraulic Turret Press with Automated Loading/Unloading
  • (2) Amada Togu Auto Tool Sharpener
  • Haas 2020 EC-400 Horizontal Machining Center
    • 40 Taper, 4 Axis, 8.1K RPM, 30HP
    • X-22″, Y-25″, Z-22″
    • 100+1 tool changer
    • Full 4th-axis indexing, 6-station 400mm pallet pool
  • (2) Haas VF2 Vertical Machining Center
    • 40 Taper; 3 Axis; 8.1k RPM; 20 Tool Capacity, 30.0 HP
    • X- 30.0″; Y- 16.0″; Z- 20.0″
  • Haas VF4 Vertical Machining Center
    • 40 Taper; 3 Axis; 8.1k RPM; 24+1 Tool Capacity, 30.0 HP
    • X- 50.0″; Y- 20.0″; Z- 25.0″
  • (1) Haas VF4SS Vertical Machining Center
    • 40 Taper; 3 Axis; 12k RPM; 24+1 Tool Capacity, 30.0 HP
    • X- 50.0″; Y- 20.0″; Z- 25.0″
  • HAAS ST-25Y CNC Turning Center
    • 10″ Hydraulic Chuck, A2-6; 3400-rpm Spindle 30.0hp
    • 4000-rpm Live Tooling with C axis, 12-Station BMT65 Turret
    • X- 8.4″; Y- +/-2.0″; Z- 22.5″, Bar capacity = 3.0″ Ø, Two-Stage Auto-Parts Catcher
    • Programmable Tailstock
  • Bridgeport Vertical Knee Mill (manual)
  • Sharpe Vertical Knee Mill (manual)
  • Hyd-Mech 520A Series II Bandsaw with Auto Feed
    • Rectangular 13.0″ high x 18.0″ wide
    • Round 12.0″ Ø @ 45°
  • Sharp Lmv-50 With Power Feed Table
  • Xlo Vertical Knee Mill
  • Timesaver Wet Process 37″ Grain + Deburr Center
  • (3) Amada FAB III 8025 8′ 80 Ton CNC Press Brake
  • Amada FAB III 1025 8′ 100 Ton CNC Press Brake
  • Amada Astro 100 Robotic FAB III 8025 8′ CNC Press Brake
  • Amada FDB III 1025 100 Ton CNC Press Brake
  • Amada FDB III 1030 100 Ton CNC Press Brake
  • (2) Amada RG35 35 Ton Press Brake
  • Amada RG50 Press Brake, 50 Ton
  • (2) Haeger 618
  • (2) Haeger 824
  • Haeger 824 Window Touch with Auto
  • Amada TSIIIs NT-HV 80 kva Inverter Table Top Spot Welder for Steel and Aluminum
  • (2) Amada ID40ST Spotwelder
  • Miller Syncrowave 351 amp Tig Welder
  • (3) Miller Syncrowave 250DX Tig Welder
  • (4) Miller Dynasty 350 amp Tig Welder
  • Millermatic 350P Mig Welder
  • (3) Millermatic 252 amp Mig Welder
  • Three-stage gas-heated spray washer
  • Final fresh RO Halo Rinse
  • Reverse osmosis system to fill the phosphate and rinse tanks
  • Gas-heated water dryer/powder bake oven
  • 470′ monorail conveyor system
  • Nordson Vantage RCM 8000 automatic powder spray booth with Vers-Spray II six-gun reciprocating automation and i-control
  • AZO sieve reclaim
  • 3 Nordson manual spray guns
  • 2012 Chevy Cargo Van
  • 2005 Chevy Cargo Van
  • 2015 International 24’ Box Truck

Printable Facility List

KEENE FACILITY

New Hampshire Sheet Metal Fabrication & ManufacturingEVS Metal’s New England sheet metal fabrication facility is conveniently located in Keene, NH, and comprises 32,000 square feet of modern, climate-controlled manufacturing space.

Keene is one of our two International Traffic in Arms Regulations (ITAR)-registered metal fab facilities. ITAR registration is required by the U.S. State Department’s Directorate of Defense Trade Controls (DDTC) for all of its contracted manufacturers, exporters and brokers. As a registered manufacturer, EVS has been given federal clearance to submit bids and subsequently supply finished defense articles for the United States Government and its authorized subcontractors.

Address: 50 Optical Avenue, Keene, NH 03431
Phone: (603) 352 1667 – Fax: (603) 352 1512

EVS NH specializes in:

  • Low to high quantity production
  • Lower quantity, larger and more complex welded enclosures and frames
  • Oversize part handling (by overhead cranes)
  • Design and engineering assistance
  • Value-added mechanical assembly
  • ITAR-compliant fabrications
  • In-house powder coating and wet paint application
  • Logistics management, including a fleet of EVS-owned delivery vehicles

 


 
 
Capabilities:
(click text to expand)
  • Solidworks 3D CAD Solid Modeling Software
  • Amada AP100 Cad/Cam Software
  • Amada Dr Abe Blank
  • Amada Dr Abe Bend
  • Amada Sheet Works
  • FabriVISION II 2047 Vision Inspection System
  • Amada FOM2 RI 3015 NT 4000w Laser 5′ x 10′ Table with a Rotary Index to cut tube
  • Amada Pulsar 2414ANT 4000 Watt 5′ x 16′ Laser System
  • Haas Vertical CNC Mill VF2 Vertical Machining Center
  • Haas VF-2 CNC Vertical Super Speed Machining Center with Thru Spindle Coolant; 12000 RPM; Probing System; 24-1 Side MT Tooling
  • Haas SL 20 CNC Lathe with programmable tail stock; Tool probe; parts catcher; Bar Feed Servo 300; 8” chuck; High Intensity Lights
  • (2) Bridgeport Milling Machine
  • Amada HA250W Horizontal Band Saw
  • Scotchman 14” Cold Saw
  • Spartan Ironworker 1W110D
  • Doal 26” Vertical Band Saw
  • (2) Stand Alone Drill Press
  • Timesaver 37″ Grain & Deburr Center
  • (2) Amada HDS 8025 8’ 80 Ton Press Brake
  • (2) Amada HDS 1303 10′ 143 Ton CNC Press Brake
  • (2) Amada RG35 Press Brake, 35 Ton
  • Power Roll, ¼” × 5′
  • (2) Pemserter 6 Ton Press
  • (2) Haeger 618
  • Haeger 824 Window Touch with Auto
  • Lincoln Electric System 35 Power Wave i400 2-station robotic welder
  • Amada TSIIIs NT-H 80 kva Inverter Table Top Spot Welder for Steel and Aluminum
  • Amada ID40ST Spot Welder
  • Miller Synchrowave 250 DX Welder
  • Miller Synchrowave 300 Welder
  • (7) Miller 250 Synchrowave
  • Millermatic 250
  • (4) Miller CP302 Welder
  • ESAB SVI 300I Welder
  • (2) Cobra Aluminum Welding System, Push-Pull Wire Feed, Water Cooled
  • AIRCO CV 300 Welder
  • McCreery Corp. 150 kVa Spot Welder
  • Stud Welding
  • (4) Prime and Finish Coat Paint Booths
  • Powder Coat Paint Booth
  • Waste2Water Model VIPIR ESD V01 Pretreatment and Recycle Module
  • Waste2Water Above-ground VIPIR 6X12 Wash Pad, ESD V23
  • Wisconsin EWN-88-7G Oven
  • (2) Nordson Powder Guns
  • Royson Tumbler
  • Travel Crane 200′, 3 Ton Electric Hoist
  • (3) 1.5 Ton Hoist
  • (2) 1.5 Ton Forklift
  • 2008 GMC Kodiak 24′ Truck
  • 2007 Chevrolet 2500 with Rack Body
  • 2017 RAM Promaster Van

Printable Facility List

EAST STROUDSBURG FACILITY

EVS Metal’s Pennsylvania sheet metal fabrication facility is conveniently located in East Stroudsburg, approximately two hours from both Philadelphia and New York City. It features over 125,000 square feet of world-class, climate-controlled manufacturing space.

Address: 1941 Route 447 (Paradise Trail), East Stroudsburg, PA 18301
Phone: (973) 839 4432 – Fax: (973) 839 4440

EVS PA specializes in:

  • Low-to-high quantity production
  • Quick-turn prototypes and production
  • Dedicated production lines (available large floor spaces)
  • Engineering and design assistance
  • Value-added mechanical assembly
  • Stamping capabilities
  • Complete logistics management, including a fleet of EVS-owned delivery vehicles

 
 
Capabilities:
(click text to expand)
  • Solidworks 3D CAD Solid Modeling Software
  • Amada AP100 Cad/Cam Software
  • Amada Dr Abe Bend
  • Amada Sheet Works
  • FabriVISION© S/L-5 Vision Inspection Machine
  • 150 Ton USI Press with Automatic Lever and Coil Feed
  • 110 Ton USI Press with Automatic Lever and Coil Feed
  • 60 Ton Rousselle OBI Stamping Press
  • (2) Amada Vipros 358 King CNC Turret with Automated FMS loading/unloading, Material Retrieval and Storage
  • Strippit 1250 XP CNC Turret
  • (2) Strippit 1000 H30 CNC Turret
  • Strippit 1000 XP/20 CNC Turret
  • Strippit 30/30 Single Station Punch Press
  • (3) D/K Technologies NCT3 Turret Tapping Station
  • (2) Amada Togu Auto Tool Sharpener
  • 4000 Watt Amada Gemini, 5′ × 10′ table
  • Acer Grinder AGS-618 with 12” Chuck
  • (2) 14” Variable Speed Drill Press
  • 16” x 40” Bridgeport Knee Mill
  • DoAll Horizontal Band Saw
  • Clousing/Delta Dual Head Drill Press
  • Hamilton Tool Co. Sensitive Drilling/Tapping Machine
  • Royersford Excelsior Arbor Press
  • South Bend CAT# CL1872B Lathe
  • Speedbelt Sander – Timesaver
  • Grivner Timesaver
  • (2) Burr King Heavy Duty Belt Sander
  • Abrasive Blast Cabinet
  • (3) 1” Burr King Belt Sander
  • Square D Stroke Sander
  • (2) Amada FAB III 8025 8’ 80 Ton CNC Press Brake
  • (1) Amada FAB III 1025 8’ 100 Ton CNC Press Brake
  • (2) RG-35 CNC 35 Ton Press Brake
  • (2) Amada RG-80 8’ CNC Press Brake
  • Pearson 10′ Shear with Auto Back Gauge
  • Boschert Corner Notcher
  • (2) Haeger 618
  • Pemserter Series 4
  • My Spot NK-21HE810 Table Top spotwelder
  • Amada ID40ST Spot Welder
  • (2) Miller Syncrowave Tig Welder
  • (2) Miller Mig Welder 200
  • 2.5 Ton Forklift (Hyster)
  • 1.5 Ton Forklift (Hyster)
  • 1.5 Ton Forklift (Yale)
  • 2017 Chevrolet W4 18′ Box Truck
  • 2006 Chevrolet Cargo Van

Printable Facility List